Hitachi YUTAKI S80 Series - Optional Functions; System

8.6.2.10 Optional Functions
Available if Controller type (LCDM)= “Unit” or “Unit + Room”.
• System
• Space functions
• DHW (*1)
? NOTE
(*1) Available if Status (DHWs)= “Enabled”.

System
• Hydraulic Sep. Status
• Energy Conguration
• Smart Function
REF Access Description
Default
Value
Range Steps Units Application
Notes
System S SC S80 M
hsb Hydraulic Sep. Status Disabled Disabled / Enabled - - ○ ○ ○ ○ -
- Energy Conguration - - - - ○ ○ ○ ○ -
- Smart Function - - - - ○ ○ ○ ○ -
Energy Conguration
REF Access Description
Default
Value
Range Steps Units Application
Notes
Energy Conguration S SC S80 M
PMConf Status Disabled Disabled / Enabled - - ○ ○ ○ ○ -
PM1 Power meter 1 Disabled
Disabled
0.1
1
10
100
1000
x10
1
pulse/
kWh
○ ○ ○ ○ (*1)
PM2 Power meter 2 Disabled
Disabled
0.1
1
10
100
1000
x10
1
pulse/
kWh
○ ○ ○ ○ (*1)
CAPCo. Capacity Conguration Disabled Disabled / Enabled - - ○ ○ ○ ○
? NOTE
(*1): If Status (PMConf) (“Status”)= “Enabled”
UNIT CONTROLLER
PMML0335A rev.1 - 04/2016
156