SAFETY
SA-1
RECOGNIZE SAFETY INFORMATION
• This is the SAFETY ALERT SYMBOL.
• When you see this symbol on your machine or in
this manual, be alert to the potential for personal
injury.
• Follow recommended precautions and safe
operating practices.
001-E01A-0688
SA-688
UNDERSTAND SIGNAL WORDS
• On machine safety signs, signal words designating
the degree or level of hazard - DANGER, WARN-
ING, or CAUTION - are used with the safety alert
symbol.
• DANGER indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury.
• WARNING indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
• CAUTION indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
• DANGER or WARNING safety signs are
located near specific hazards. General
precautions are listed on CAUTION safety signs.
• Some safety signs don’t use any of the
designated signal words above after the safety
alert symbol are occasionally used on this
machine.
• CAUTION also calls attention to safety messages in
this manual.
• To avoid confusing machine protection with per-
sonal safety messages, a signal word IMPORTANT
indicates a situation which, if not avoided, could
result in damage to the machine.
• NOTE indicates an additional explana-
tion for an element of information.
002-E01C-1223
SA-1223
Find manuals at https://best-manuals.com
To Next Page
Loading...
Need help?
General
