Weave Cable Modem Setup Guide
Revised: 2019-07-31
These instructions detail how to install a Hitron CGN cable modem and router with Weave's
network. Please contact Weave Support at any point in time, if the instructions do not make
sense or you are not getting the same results as the pictures.
Please note, you may have received your modem but your internet will not work until Weave
Networks has correctly connected you to the network. Please make sure you have received an
email or a call from a Weave staff member saying your internet is now connected before
attempting the below.
Step 1
Unbox the Hitron CGN modem (or if you have your own modem). It should look like the picture
above.
Step 2
Take the coax cable, it should look like the
cable pictured.
www.weavenetworks.com 1-587-415-2900 support@weavenetworks.com Page 1 / 4
To Next Page
Need help?
General
