Need help?Do you have a question about the Hitron CODA Series and is the answer not in the manual?
Find your Cable Internet Account Number and login information ready for Step 3.
Unplug the old modem and place the new one in the same spot or near a Coax and Power Outlet.
Connect the modem to a Coax Outlet on the wall, ensuring a tight connection.
Connect the Power Adapter (12V, 2A) to the Cable Modem and then plug it into a Power Outlet.
Wait until the four LEDs on the right are SOLID GREEN or BLUE, which may take up to 2-3 minutes.
Connect the Yellow Ethernet Cable to the modem's Ethernet Port and your Router's WAN Port or computer.
Make sure your computer, tablet, or cell phone is ON and connected to your Router via WiFi or the Cable Modem.
Open a web browser; it may redirect automatically or you may need to go to www.google.com.
If automatic activation is not available, contact your Cable Internet Service Provider to activate this cable modem.
Indicates when the modem is powered on.
Indicates connection status to your Internet Service Provider.
Shows connection to a downstream channel (Solid Green or Blue).
Shows connection to an upstream channel (Solid Green or Blue).
Indicates when a device is connected to one of the Ethernet ports.
To Next Page
General
