■ Product Identification
- The product identification mark is attached onto the housing and shows the model
name, serial number, working temperature, working pressure, and matters regarding
output. The serial number is a unique manufacturing number for the identification of
products.
■ Precautions for Use
- Make sure to connect the product and vessel using required tools for sure.
- Keep the lock key safe and make sure that it is locked.
- Do not apply high impact to the product.
■ Precautions for Wiring
- Make sure to wire contacts correctly.
- Pay attention to prevent electric shock.
■ Disposal of Product
- Remove the snap switch of switch block from the housing before disposing a product.
- No part (ex. Mercury switch) has influence on the environment, so no special attention is required.
To Next Page
Loading...
General