HITZE SIGA - Recommendations Concerning the Floor

8
7. use an Allen key to unscrew M6
screws holding the cast iron ue
and cast iron lid of the stove
8. swap the ue with the lid
9. mount the side walls back (make
the whole for the ue in the side
cover) and put the top lid and the
cast iron caseback
Moving the ue from the top of the stove to the side.
Steps from 1-4 should be followed and then:
2.3. Recommendations concerning the oor:
▪ before installing the stove, check the load-bearing capacity of the oor (to make sure that it is sucient to
bear the weight of a given type of appliance);
▪ the oor must be made of non-ammable material with a minimum thickness of 30 cm; a safety area
of least 60 cm must be ensured in front of the stove door, and of at least 30 cm from the edges of the door.
Fig. 5 Recommendations concerning the oor and surrounding