HEV-1000 User Manual
When FTP SETTING is completed, log on to the FTP server asynchronously. Your log-on
result will appear in a pop-up.
Connection with the FTP server will be displayed in SETTING screen as below.
When connection with the FTP server was lost due to network problem or other reasons,
event recording video and log file transmitted to the FTP server will be kept by HEV-1000 and it
will start transmitting again when connection is back (Save/Transmit maximum 100 recordings)
(Caution) Such re-transmission of the files is not made if you turn off the HEV-1000 and turn
it on.
15) TOUCH CALIBRATION
If your touch screen is misaligned so that you are not able to touch where you want to, then
use this menu to calibrate touch motion. According to the instruction, touch the exact center of
the cross appeared on the screen for 3 times. When your touch-calibration is completed, your
touch compensation value will be saved within HEV-1000.
(Caution) Use of stylus pen is more accurate than your finger.
To Next Page
Loading...
Need help?
General