04
Assess where best to position the Siren in your
chosen location. It should be at a height between
2.5m to 3.5m. Ensure that there is an internal power
supply within 8m of this location.
Position the ladder safely and ensure you have
appropriate safety equipment before drilling. Drill a
6mm pilot hole from the outside to the inside.
Use a 12mm drill bit to increase the diameter of the
pilot hole.
To install your Siren follow the steps below:
Important: Make sure that you comply with all local building regulations, install in accordance
with building and installation codes where you live, and that you know where all in-wall pipes
and electrical wires are before drilling. If you don’t feel comfortable drilling through an exterior
wall, contact Hive by visiting www.hivehome.com/install to arrange a professional installation.
Always use safety and protective gear appropriate for the type of work and tools being used.
How to fit the siren
To Next Page
Loading...
Need help?
General