To Next PageTo Next Page
Need help?Do you have a question about the HiWeigh X3AM and is the answer not in the manual?
General| Material | Stainless Steel |
|---|---|
| Power Source | 2 x AAA batteries |
| Overload Indicator | Yes |
| Low Battery Indicator | Yes |
| Type | Digital Scale |
| Units | g, oz |
| Display | LCD |
| Auto-off | Yes |
General safety warnings for using the X*M Series indicators, including environmental and handling precautions.
List of error codes displayed on the LCD and their corresponding meanings for troubleshooting.
Procedure for zeroing the indicator, ensuring accurate measurements.
Steps to set tare by placing an empty container on the platform.
Procedure for entering tare values digitally using the keypad.
Instructions on how to remove an active tare value.
Overview of the four set points (A, B, C, D) and their status symbols (LO, OK, HI).
Detailed steps for configuring the four set points A, B, C, and D.
Configuration and connection details for the RS232 serial interface.
Specifies the RS232 communication parameters like bits, parity, and stop bits.
List of RS232 commands for configuring, querying, and operating the indicator.
