Need help?Do you have a question about the HiWeigh X722 and is the answer not in the manual?
Details for connecting 6-wire and 4-wire load cells to the indicator.
Pinout and connections for the RS232 serial communication port.
Setting the Analog-to-Digital converter count for improved accuracy.
Configuring upper and lower weight limits for check weighing.
Setting the automatic power-off feature to save energy.
Adjusting the display backlight mode (auto, on, off).
Enabling or disabling the hold function for stable readings.
Selecting RS-232 output formats and enabling/disabling the port.
Configuring the baud rate for RS-232 communication.
Setting the zero averaging parameter for improved stability.
Inputting the G value for local calibration adjustments.
Procedure for performing span calibration using a known weight.
Steps for zero calibration of the weighing indicator.
Details for connecting 6-wire and 4-wire load cells to the indicator.
Pinout and connections for the RS232 serial communication port.
Setting the Analog-to-Digital converter count for improved accuracy.
Configuring upper and lower weight limits for check weighing.
Setting the automatic power-off feature to save energy.
Adjusting the display backlight mode (auto, on, off).
Enabling or disabling the hold function for stable readings.
Selecting RS-232 output formats and enabling/disabling the port.
Configuring the baud rate for RS-232 communication.
Setting the zero averaging parameter for improved stability.
Inputting the G value for local calibration adjustments.
Procedure for performing span calibration using a known weight.
Steps for zero calibration of the weighing indicator.
General| Brand | HiWeigh |
|---|---|
| Model | X722 |
| Category | Accessories |
| Language | English |
To Next Page
