Need help?Do you have a question about the HK Audio actor dx and is the answer not in the manual?
General| Brand | HK Audio |
|---|---|
| Model | actor dx |
| Category | Speaker System |
| Language | English |
Covers essential safety guidelines for product usage, placement, and maintenance to prevent hazards.
Warns about potential hearing loss from high noise levels and recommends ear protection.
Details on registering the ACTOR DX for an extended five-year warranty, including online and mail options.
Class D digital power amps offer high efficiency, smaller size, and lighter weight, enhancing reliability and dynamic response.
The DDO™ Controller ensures a homogenous system with uniform dynamics and a clear sonic image.
Allows efficient sound utilization with 7.5° and 15° tilt angles for optimal mid/high unit alignment.
Designed for quick and easy transport and setup of the ACTOR DX system.
Contains a 12" speaker and 1.4" driver, delivering 600W with DDO™ Controller.
Features a 15" loudspeaker with 500W power handling and 8 ohm impedance.
Passive version of Sub A, with identical housings and speakers.
Use subwoofers on casters and mid/high units on top. Original HK AUDIO covers provide protection.
Standard setup includes two ADX 112 A mid/high units, two ADX 115 Sub A and two ADX 115 Sub B subwoofers.
Consists of two ADX 112 A mid/high units; subwoofer output is disabled.
Comprises two ACTOR ADX 112 A mid/high units and two ADX 115 Sub A bins.
System uses four ADX 112 A mid/high units, four ADX 115 Sub A and four ADX 115 Sub B bins.
Utilizes HK AUDIO rigging frame for suspension, allowing adjustable inclination.
Mounts on subwoofer for 7.5° or 15° tilt of the mid/high unit for optimal alignment.
Details the Power Switch, Mains Input, Link, Ground, Input Sensitivity, Overload LED, Line In, Through, Limiter LEDs, and Subwoofer Out.
Explains the numeric display for system configurations and the Up/Down buttons for selection.
Describes the Top Level knob for mid/high unit volume and Subwoofer Level knob for bass frequency adjustment.
Explains the meaning of green, yellow, and red LEDs indicating signal, limiting, and protection status.
Details Sub A's Power Switch, Mains Input, Power On LED, Subwoofer Input, and Speaker Output.
Details Sub B's Speakon Input, nominal power handling, frequency response, and sensitivity.
Advises protecting electronics from moisture, rain, and spills like soft drinks or beer.
Emphasizes keeping rear panel ducts clear for proper ventilation to prevent overheating.
Recommends optimal input signals and checking cables to prevent noise, distortion, and equipment damage.
Suggests connecting the mixer and ACTOR DX to the same electrical circuit to prevent humming.
Lists optional accessories including the Tilt-Unit, Dust Covers, and Rigging Frame.
Guides on checking power cord, supply, and circuit breakers if the Power On LED does not light up.
Provides steps for diagnosing no sound, including checking cords, signal sources, gain, and speaker connections.
Addresses weak low frequency output by checking Subwoofer Level knob and system configuration.
Offers solutions for distorted sound, including checking mixer levels, enclosure level knobs, and limiter LEDs.
Suggests checking signal source cords and engaging the Ground Lift switch to eliminate hum.
Details connections, input impedance, sensitivity, frequency response, amplifier, speaker, dimensions, and electrical data.
Lists connections, power handling, frequency response, sensitivity, amplifier, woofer, dimensions, and electrical data.
Details connections, nominal power handling, frequency response, sensitivity, woofer, dimensions, and weight.
To Next Page