Need help?Do you have a question about the Hobart D300 and is the answer not in the manual?
General| Phase | 1 |
|---|---|
| Bowl Capacity | 30 qt |
| Horsepower | 1/2 HP |
| Transmission | Gear |
| Voltage | 115 V |
| Motor | 1/2 HP |
| Speed | 3 fixed speeds |
Check for shipping damage immediately after unpacking and contact carrier if damaged.
Place mixer in operating location with adequate space for controls and bowl removal.
Details electrical specifications, wire sizes, fuses, and circuit breakers for different models.
Connect electrical leads to the pedestal conduit as per the wiring diagram.
Ensure planetary rotation matches the arrow on the Drip Cup for three-phase machines.
Keep hands, clothing, and utensils clear; do not operate without interlocked guard.
Explains START, STOP buttons and timer functions for timed and non-timed mixing.
Details operation of programmable timer, including continuous, dial, and preset time modes.
How to safely change speeds using the gear shift lever; describes speed functions.
How to raise and lower the bowl using the handle.
Instructions for washing, installing bowls, agitators, and raising the bowl during mixing.
How to rotate, remove, and reinstall the wire cage assembly for access and operation.
Procedures for installing and operating various mixer attachments.
Daily cleaning instructions, how to clean bowls, agitators, and the mixer body.
Details lubrication points like bowl clamps, bowl lift mechanism, and slideways with frequency.
Lists symptoms like "Mixer will not start" and their possible causes.
Contact local Hobart Service Office if equipment requires repair or service.
To Next Page
