Need help?Do you have a question about the Hobart H-600-T and is the answer not in the manual?
Placement and leveling guidelines for the mixer.
Instructions for connecting the power supply to the mixer.
Procedure for starting the H-600 model motor.
Procedure for starting the H-600-T model motor.
Procedure for filling the transmission and planetary with oil.
Details on the H-600's thermal overload protection and reset.
How to select operating speeds on the H-600 model.
Details on the H-600-T's electrical system, starter, and timer.
Description of the brake actuation and function for the H-600-T.
How to select operating speeds on the H-600-T model.
Information on bowl capacities and agitator attachment.
List of available attachments and usage for the meat chopper.
Function and reset procedure for overload protection on H-600-T.
Maintenance of agitator shaft bearings and the bowl lift mechanism.
Function of drip cup and lubrication of motor bearings.
Details on planetary oil, routine checks, and lubrication.
Guides for bowl support removal, looseness adjustment, and beater clearance.
Procedures for bowl lift screw replacement and handwheel bracket.
Instructions for adjusting the H-600-T brake action.
Steps for planetary removal, beater shaft, and bearings.
Details on planetary seal function and the oil pump system.
Step-by-step guide for disassembling the transmission case.
Procedure for removing the attachment hub from the transmission.
Steps for motor removal and details on motor bearing lubrication.
Function and operation of the H-600-T motor controller and timer.
Operation of the H-600-T brake circuit and overload release.
Information on the location of the machine's wiring diagram.
To Next Page
General
