Need help?Do you have a question about the Hobart Legacy HL600 and is the answer not in the manual?
Ensures sufficient precautions are observed during manual handling, cleaning, and operation of the mixer.
Identifies safety messages in the manual using symbols for important safety information.
Defines responsibility for installations, repairs, and alterations not performed by authorized technicians.
Details the selection of environmentally friendly and recyclable packaging materials.
Advises on recycling old appliances by contacting local waste collection centers.
Provides instructions to minimize dust hazards during mixing, emphasizing precautions for flour.
Lists actions that must never be performed while operating or maintaining the mixer.
Lists essential practices and precautions to follow during mixer operation and maintenance.
Provides safety guidelines specifically for using the mixer with attachments.
Outlines initial checks and procedures before operating the mixer for the first time.
Identifies and explains the function of the mixer's control panel components.
Details the correct procedure for installing and positioning the mixer bowl.
Explains how to install and remove the agitator from the mixer.
Describes the STIR feature allowing operation with the bowl in a down position.
Explains the operation of the power bowl lift mechanism for raising and lowering the bowl.
Provides step-by-step instructions on how to prepare the mixer for the mixing process.
Offers important tips and considerations for optimal mixer operation.
Details the usage of the timer for both count-up and count-down mixing modes.
Explains how to enter and exit the recipe programming mode.
Describes how to view recipe steps without running the mixer.
Guides the user through the process of selecting and running a programmed recipe.
Explains how to stop and resume a recipe program during operation.
Details how to access special functions for user-resettable parameters.
Provides instructions for programming up to 9 mixer recipes with 6 steps each.
Explains how to set a pause step within a recipe for adding ingredients or resting dough.
Describes how to change the active or inactive status of programmed recipes.
Guides the user through changing the factory-set access code for recipe parameters.
Details the steps for safely unloading the bowl and agitator from the mixer.
Explains how to open and close the wire guard cage for access.
Provides instructions for removing and cleaning the wire guard cage assembly.
Details the correct procedure for reassembling the wire guard cage.
Provides recommended maximum capacities for various products for HL600 and HL662 mixers.
Details the types of agitators available and their specific uses with the mixer.
Explains how to use the meat chopper attachment and other accessories.
Describes splash covers and extensions for reducing dust and splashing.
Details the bowl scraper attachment for re-introducing material into the mix.
Explains the use of bowl trucks for safely maneuvering heavy bowls.
Provides the overall physical dimensions and model variations of the Legacy series mixers.
Details procedures for safely unpacking and handling the heavy mixer unit.
Specifies requirements for selecting a suitable, safe, and level installation location.
Outlines requirements for safe and compliant electrical installation.
Directs the user to refer to the wiring diagram for proper electrical connections.
Emphasizes the importance of explaining correct operation and cleaning to users.
Details lubrication points and procedures for maintaining mixer components.
Explains how to perform necessary adjustments for proper mixer operation.
Stresses the need for regular inspection of safety interlock systems.
Advises on inspecting and replacing the transmission belt for wear.
To Next Page
General
