Need help?Do you have a question about the Hobart Legacy + HL600 and is the answer not in the manual?
General| Bowl Capacity | 60 quarts |
|---|---|
| Power | 1.5 HP |
| Motor Power | 1.5 HP |
| Transmission | Gear-driven |
| Bowl Lift | Manual |
| Material | Stainless steel |
| Voltage | 200-240V |
Best practices for using the mixer, including bowl and agitator fitting.
Procedures for checking and reporting shipping damage upon receipt of the mixer.
Selecting a suitable flat, level surface and leveling the mixer.
Essential checks before operating the mixer, including lubrication and wiring.
Step-by-step instructions for installing and removing the mixing bowl.
Instructions for installing and removing agitators for the mixer.
Procedures for raising and lowering the bowl, including during mixing.
Using the count-up mode for continuous mixing operations.
Important notes and tips for operating the mixer effectively.
How to rotate, open, and close the wire cage for access.
Regular inspection of safety systems like wire cage and bowl support interlocks.
Lubrication of slideways, planetary seal, and agitator shaft.
Checking and adjusting the clearance between the agitator and the bowl.
Procedure for cleaning and lubricating the bowl lock lever.
Guide to common symptoms, causes, and contacting service.
Contact information for Hobart service when issues arise.
Description of various agitators and accessories for the mixer.
To Next Page
