– 13 –
Models HL800, HL800C, HL1400, and HL1400C
HL800, HL800C, HL1400, and HL1400C Mixer Speeds
STIR (Slow) For incorporating ingredients
SPEED 1 (Low) For heavy mixtures such as pizza dough, heavy batters, and potatoes
SPEED 2 (Medium-Low) For mixing cake batters, mashing potatoes, and developing bread dough
SPEED 3 (Medium-High) For incorporating air into batches, as well as nishing whipped items
SPEED 4 (High) For maximum, accelerated air incorporation into light batches
BOWL PLACEMENT
The bowl must be installed onto the bowl support before the agitator is installed. The bowl is
heavy and must be correctly handled and lifted to avoid personal injury.
To Install
1. Fully lower the bowl support by pressing
and holding the down arrow on the bowl
switch (Fig. 6, Fig. 7, and Fig. 8).
2. Position the bowl so the alignment pins
on the left side of the bowl support
(Fig. 9) t in the holes in the bowl.
3. Swing the bowl into the locked position on
bowl support (Fig. 9).
To Remove
Before lowering the bowl onto a bowl
truck, always unlock the bowl and swing the bowl
out slightly.
1. Lower the bowl by pressing and holding the down arrow on the bowl switch (Fig. 6, Fig. 7, and
Fig. 8).
2. Unlock bowl and swing out slightly from the locked position.
3. Open the wire cage and remove the agitator.
Time Selector
Starts
Mixer
Stops
Mixer
Raises
and Lowers
Mixing Bowl
Speed Selector
Displays Selected Mix Speed
Displays Mixing Time
Fig. 8
Fig. 9
To Next Page
Loading...
