6
5.3 ALWAYS.
• Use the mixer in a well-lit area.
• Ensure the bowl, agitator, attachment and guard are correctly fitted to the mixer.
• Disconnect the mains electricity supply before cleaning the mixer.
• Clean the mixer daily.
• Remove agitator before using any attachments.
• Stop mixer before adding more ingredients.
• Use the stop button to stop machine.
• Clean the bowl, agitators and attachments after use.
• Clean the mixer using mild soap and water.
• Service the mixer and attachments at least twice a year depending on the
frequency of use.
• Use the mixer as intended and inline with the operating instructions.
• Use the correct reduced size equipment (bowl and agitators).
• Use attachments that are CE approved and CE marked.
5.4 ATTACHMENT SAFETY INSTRUCTIONS.
The following instructions must be observed when using the mixer with attachments.
Please also refer to the safety instructions in Section 6.0, page 7 and the instructions
provided with the attachment. Only CE marked and approved attachments must be
used.
A FULLY TRAINED AND COMPETENT PERSON SHOULD ONLY USE THE
ATTACHMENT AND/OR MIXER.
• Do not fit an attachment while the mixer is operating.
• Do not wear loose clothing.
• Do not use the mixer or attachment if a fault develops or the machine is unsafe.
• Do not access rotating parts.
• Do not use excessive force when operating the attachment, which could affect the
stability of the mixer.
• Do not operate the mixer if parts are disassembled.
• Always use the attachment and/or mixer in a well-lit area.
• Always ensure the attachment is operating at the correct speed.
• Always clean the attachments after use and refer to the attachment manufacture's
cleaning instructions.
• Always service your mixer and attachments regularly; at least twice a year
depending on the frequency of use.
To Next Page
Loading...
Need help?
General
