Need help?Do you have a question about the Hobart Legasy HL300 and is the answer not in the manual?
Instructions for checking the mixer for shipping damage immediately after unpacking.
Guidance on selecting an appropriate operating location and ensuring adequate space.
Steps to verify the mixer is functioning correctly after installation.
Identifies and describes the various controls and operating parts of the mixer.
Details the control panel layout and functions for the HL300 model.
Details the control panel layout and functions for the HL400 model.
Explains mixer speed settings, their applications, and the timer function.
Outlines the maximum number of recipes, steps, and time limits for the HL300 timer.
Outlines the maximum number of recipes, steps, and time limits for the HL400 timer.
Step-by-step guide for attaching an agitator to the mixer shaft.
Step-by-step guide for detaching an agitator from the mixer shaft.
Instructions for using the timer in a count-up mode for continuous mixing.
Instructions for using the timer in a count-down mode for timed mixing.
Provides important tips and notes for operating the mixer and its timer functions.
Important notes and considerations for using the recipe timer feature.
Step-by-step guide on how to select and run a programmed recipe.
Details the available speed and time settings for programming each recipe step.
Instructions for entering and exiting the recipe mode on the HL400 mixer.
How to review programmed recipe steps without running the mixer.
Guidance on lubricating specific parts of the mixer, like slideways and seals.
Instructions for lubricating the planetary seal to prevent squeaking.
How to check and adjust the clearance between the agitator and the bowl.
Method for measuring the agitator clearance using flour.
To Next Page
General
