Need help?Do you have a question about the Hobart LEGACY HL300 and is the answer not in the manual?
General| Model | LEGACY HL300 |
|---|---|
| Type | Planetary Mixer |
| Bowl Capacity | 30 qt |
| Motor Power | 1.5 HP |
| Speed Settings | 3 |
| Phase | 1 or 3 |
| Electrical | 208-240/60/1 |
Procedure for checking and reporting shipping damage upon receipt of the mixer.
Guidance on selecting a suitable operating location and leveling the mixer.
Instructions for connecting the mixer to the power supply, including safety warnings.
Steps to verify the mixer's basic functionality after installation.
Identifies key operating parts of the mixer shown in a diagram.
Explains the function of STIR, Speed 1, Speed 2, Speed 3, and the Timer.
Steps for correctly installing the mixing bowl onto the mixer's support.
Instructions for installing and removing the mixer's agitator (beater, whisk, hook).
How to operate the manual lift handle to raise and lower the bowl.
Steps to set up the mixer with the bowl and agitator before starting.
How to use the timer in continuous mixing mode.
How to use the timer for timed mixing operations.
Important tips and reminders for operating the mixer effectively.
Steps for safely removing the bowl and agitator after mixing.
How to operate the protective wire cage for adding ingredients or accessing the bowl.
Instructions for removing, washing, and drying the wire cage and splash guard.
Steps for properly reattaching the wire cage after cleaning.
Procedure for washing new bowls and accessories before first use.
Guidelines for routine daily cleaning of the mixer unit itself.
Details on lubricating the mixer's slideways and planetary seal.
Procedures for adjusting the agitator clearance to prevent bowl contact.
Contact information for obtaining professional service for the mixer.
To Next Page
