Need help?Do you have a question about the Hobart N50 and is the answer not in the manual?
General| Bowl Capacity | 5 quarts |
|---|---|
| Speed Settings | 3 |
| Motor Power | 1/6 HP |
| Voltage | 115 V |
| Material | Stainless Steel |
| Manufacturer | Hobart |
| Model | N50 |
| Phase | 1 |
| Hertz | 60 Hz |
Overview of the N50 mixer's specifications and standard equipment.
Instructions for checking the mixer for possible shipping damage after unpacking.
Guidance on placing the mixer on a suitable surface with adequate space.
Warning and instructions regarding the mixer's three-pronged grounding plug.
Explanation of the mixer's ON-OFF switch and gear shift lever for speed control.
Recommended for heavy mixtures like bread dough and potatoes.
Suitable for light dough, cake batters, and some whipping.
Fast speed for light work like whipping cream and thin batters.
Procedure for properly installing and locking the mixer bowl.
Steps for installing the agitator onto the mixer shaft.
Wiping the mixer with a damp cloth; cleaning bowls and agitators in a sink.
Instructions for removing and reinstalling the agitator spring for cleaning.
Wiping the drip cup clean as part of periodic maintenance.
Recommendation to lubricate slideways twice a year with Lubriplate 630AA.
Guidance on returning the equipment to a local Hobart Service Center.
Steps to diagnose why the mixer is not starting, including power and circuit breaker checks.
To Next Page
