To Next PageTo Next Page
Need help?Do you have a question about the Hobart 4346 and is the answer not in the manual?
General| Model | 4346 |
|---|---|
| Category | Mixer |
| Type | Planetary Mixer |
| Speed Settings | 3 |
| Motor Power | 1.5 HP |
| Phase | 1 or 3 |
| Bowl Material | Stainless Steel |
| Bowl Lift | Manual |
| Bowl Capacity | 60 Quarts |
Lists available optional accessories for the mixer-grinder, such as power cords, legs, and foot switches.
Guide for connecting the pneumatic foot switch to the mixer-grinder's electrical supply.
Instructions for securely bolting the leg or caster assemblies to the mixer-grinder base frame.
Procedure for adjusting the feet or caster legs to ensure the mixer-grinder is level.
Steps to check and maintain the proper oil level in the gear case using the sight gauge.
Guidance on checking and replenishing the oil level in the chain drive reservoir.
Details on receptacle, circuit, and plug types for various voltage and phase configurations.
Procedure to verify and correct the motor and worm rotation before permanent electrical connection.
Explanation of the control box heater's automatic operation for keeping controls dry.
Details the start, stop, foot switch, and hopper guard interlock functions for operating the machine.
Instructions for removing, cleaning, and assembling the grinder attachment and mixing arm.
Step-by-step guide for performing first and second grinds using the mixer-grinder.
Instructions for cleaning the mixing arm, adjusting ring, knife, plate, worm, and cylinder.
Details on motor bearings, gear case lubrication, and chain drive reservoir replenishment.
Guidance on contacting the Hobart Service Office for necessary repairs or adjustments.
