15
Running a Recipe
• Select the desired recipe by pressing the recipe
button. The button lights and step one of the
recipe displays.
• Press START.
• The mixer begins to run step one of the
programmed recipe. The timer display
indicates the mixer speed and counts down
the remaining time.
• When the time expires, the mixer
automatically switches to the speed and time
for the next recipe step and continues mixing.
Mixing steps run in succession at the
programmed speed and time.
• If a Pause step is
programmed in the
recipe, the mixer stops
and the time display
counts down the pause
time to 00:00 and beeps
• After a Pause step, the
speed display for the next step flashes; press
START when ready to resume mixing.
• The mixer stops after the last step.
• The timer displays revert back to step one
for that recipe (as shown at the top of this
page). Run the same recipe again by
pressing START or select a different
recipe.
Interrupting a Recipe
• Mixing can be stopped at any time by pressing
STOP.
• The speed display flashes to indicate the
program is interrupted, and the timer displays
the remaining time. Press START to resume
mixing
• If you do not wish to resume mixing, press the
recipe button twice until it is not lit — this
returns to Standard Timer Mode.
Timer will beep between steps and at end of step.
To Next Page
Loading...
Need help?
General
