20
6.10 UNLOADING.
1. Unlock the bowl and swing-out slightly. Press and hold the down arrow on the
bowl switch to lower the bowl
2. Open the wire cage assembly.
3. Remove the agitator from the agitator shaft.
4. Remove the bowl from the bowl support.
6.11 WIRE GUARD CAGE.
The wire cage can be rotated out of the way to add ingredients or to access the bowl and
agitator.
Note how the grooves on the nylon retainer shoes allow the Wire Cage to ride around the
circular ridge of the planetary drip cup.
• To open the wire cage, rotate it to your left.
• To close the wire cage, rotate it to your right until it stops in the front-centre,
closed position.
NOTE: The wire cage must be returned to the closed position for the mixer to operator.
Figure 6.
To Next Page
Loading...
Need help?
General
