EasyManuals Logo

Hobart Legacy HL600 User Manual

Hobart Legacy HL600
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
3
1.0 SAFETY INFORMATION.
The procedures and precautions contained in this manual are understood to apply to the
machinery only when it is used in the prescribed manner.
If the machinery is used other than in the recommended manner, the operator will be
responsible for his/her own safety and for the safety of the other persons who may be
involved.
The information in this manual has been prepared to assist the operator to understand,
maintain, and operate the mixer. In order to prevent accidents, read, understand and
follow all the precautions and warnings contained in this manual before installation or
operating for the first time. This manual must be studied to obtain a clear understanding
of the mixer and its capabilities.
1.1 SAFETY GUIDELINES.
Ensure sufficient precautions are observed during manual handling of the mixer
particularly when moving into position on installation. Reference must be made to
manual handling regulations. The mixer weights are given in Table 1.
Do not hose or pressure clean this appliance. It is vital to adhere to the cleaning
instructions detailed in section 9 of this manual.
Do not remove any covers or loosen any fittings whilst the machine is operating.
Ensure this manual is kept in an easily accessible place for future reference near the
mixer.
All operators must be trained in the safe operation of the mixer and attachments.
Ensure the electrical supply has been isolated before attempting to service or move
the mixer.
Rotating machinery and electricity are potentially hazardous and may cause injury if
sufficient precautions are not taken prior to operating or servicing the machine.
Always have your mixer and attachments regularly serviced; at least twice a year,
depending on frequency of use.
When mixing products that develop dust care must be taken. Mix the ingredients
using the STIR facility until the dust is eliminated.
Exposure to dust (including flour) may be harmful to health causing rhinitis (running
noses), watering eyes and possibly occupational asthma.
1.2 WARNING SYMBOLS.
To identify the safety messages in this manual, the following symbols have been used
The "Warning" symbol is found primarily where the corresponding information
is important for the safe use of the machinery.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hobart Legacy HL600 and is the answer not in the manual?

Hobart Legacy HL600 Specifications

General IconGeneral
BrandHobart
ModelLegacy HL600
CategoryMixer
LanguageEnglish

Related product manuals