EasyManuals Logo

Hobart Legacy HL600 User Manual

Hobart Legacy HL600
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
26
The C Wing Whip is used for whipping material that is too
heavy for the D Wire Whip. The heavy frame permits its use
for light creaming and beating. It is often used for whipping or
blending potatoes, butter, and mayonnaise or light icings. It is
generally used in first and second speed for whipping heavy
products like potatoes or in third or fourth speed for light
products such as mayonnaise or icings.
The P Pastry Knife combines shortening with flour, and is
ideal for light pastry shells (patty shells), flaky pie dough and
similar mixes. The cutting action of the knife practically
eliminates rubbing and allows delicate ingredients to be
combined without over development. The P Pastry Knife is
suitable for stirring operations in low speeds and for fast
cutting operations in medium speeds. You should not use the
P Pastry Knife at high speed if you want the pastry to have a
flaky texture.
The I Wire Whip makes sponge cakes and mixes
marshmallow and icing for heavy whipping.
8.2 USING THE ATTACHMENT FACILITY.
MEAT CHOPPER ATTACHMENT
The Meat Chopper Attachment allows you to prepare many additional foods with your
Hobart mixer. A plate having 4-mm holes comes with the Meat Chopper Attachment
when shipped from the factory. Other plates are available with hole sizes 2, 5, 6, 10, 13,
16 and 18 mm for fine to coarse chopping. The results are the same as produced by
Hobart commercial meat choppers. Operate Meat Chopper Attachments in second
speed on the HL600 or dedicated speed on the HL662 mixer. The feed pan should be
kept in place in the cylinder for ease of feeding. Cut meat into strips and feed it into the
chopper using the feed stomper only as needed. Substances that could become packed
tight in the chopper like breadcrumbs are not recommended. If material in the cylinder
stalls the mixer, push the STOP button at once. DO NOT attempt to restart at a slower
speed. Remove the adjusting ring, knife, plate and worm and clear the obstruction.
Always keep the drain hole on both the Attachment Hub and Meat Chopper clean, clear
and free of obstruction.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hobart Legacy HL600 and is the answer not in the manual?

Hobart Legacy HL600 Specifications

General IconGeneral
BrandHobart
ModelLegacy HL600
CategoryMixer
LanguageEnglish

Related product manuals