28
Clean the mixer with a hot damp cloth; thoroughly wipe the bowl support arms and all
exterior surfaces. The guard should be cleaned as follows.
Cleaning the guard.
The guard should be cleaned at the end of each day. Once the guard is removed (see
Section 6.12 page 21) it can be cleaned with hot water, using a suitable non-abrasive
detergent and soft bristle brush. The stainless steel splashguard can be wiped off and/or
washed with a cloth or sponge them using warm soapy water. Rinse with clean water
and dry with a clean cloth.
To Next Page
Loading...
Need help?
General
