Need help?Do you have a question about the Hobby King HK-TR6A and is the answer not in the manual?
Crucial safety guidelines including operational restrictions and supervision requirements.
Procedure for separating locos and plugging the HK-TR6a RX into the DEC-U PCB correctly.
Guidance on antenna positioning and connecting various power sources like batteries or track power.
Details on motor wiring, inherent protection features, and crucial isolation for lighting circuits.
Step-by-step procedure to establish communication between the transmitter and receiver.
Adjusting start/top speed, speed matching, and controlling momentum for smooth operation.
Configuring default direction, performing system resets, and setting up sound trigger functions.
Instructions for controlling locomotive speed, direction, stopping, and applying brakes.
Managing momentum effects and activating sound system triggers via transmitter controls.
Procedure for linking multiple locomotives for synchronized operation and removing them.
Guidelines for integrating the ESC with QSI sound systems, including setup and control.
Addresses common problems like slight jerks, non-responsive controls, and calibration errors.
Instructions for resetting the default direction for specific loco types like AristoCraft or Bachmann.
Recommendations for using and maintaining Hobby King transmitter batteries for optimal performance.
Guide to programming the Hobby King TX using software for features like stick modes and endpoints.
General| Channels | 6 |
|---|---|
| Frequency | 2.4GHz |
| Range | Up to 1.5km |
| Current Drain | 120mA |
| Receiver | HK-TR6A |
| Low Voltage Alarm | Yes |
| Display | LCD |
| Model Memory | 10 |
| Voltage | 4.8V to 6V |
To Next Page