10-12
blinkar
blinkt
blinkar
blinkt
Select the power setting (1kW, 2kW or 3kW) by
pressing the +/On or the -/Off button. In the illus-
tration, the 3kW power setting has been selected
(some heaters are only equipped with 1-2kW).
The symbol for electric heating is shown when
the control unit is back in an idle state.
Press the button with the arrow until the symbol
for electric heating blinks.
Switch the electric heating off by pressing the
-/Off button until all of the power settings have
been deleted. „OFF“ appears on the display next
to the temperature.
The symbol for electric heating disappears when
the control unit is back in an idle state.
Electric heating
Press the button with the arrow until the symbol
for electric heating blinks. „OFF“ appears on the
display next to the temperature.
blinkar
blinkt
To Next Page
Loading...
Need help?
General
