05-8
Fastening for the outer tent
Use the specially developed Hobby Vario Clip as
a ridgepole bracket to securely attach an outer
tent to the camper. The clip can be attached
without screws and has been specially adapted
to the contour of the moulding. The moulding is
lined in the relevant places with a pressure and
moisture-resistant plastic honeycomb design.
(cf. diagram in Chapter 14.7)
Your Hobby dealer will be pleased to
answer any questions regarding the
fastening of the outer tent.
The camper has guide rails for skirting in the lo-
wer area of the superstructure. Always slide the
skirting in from the middle of the vehicle towards
the outer edges.
To Next Page
Loading...
Need help?
General
