06-8
Bed expansion for vehicles with side
seating arrangement
• To open, press the push lock
o
.
• Carefully place the external panel
p
on the
oor.
• Place the additional panel for the bed
q
in a
horizontal position or tilt its longitudinal side
slightly upwards.
• Raise the external panel
p
by approx. 60°
and lower the additional panel for the bed
q
until the two parts support each other.
7
6
8
Bed Expansion for Long Beds
• Lift up the night table attachment
r
and
remove it.
• Pull on the handle
s
and pull out the slatted
frame to its full horizontal position.
• Place the additional cushion on the slatted
frame.
It is possible to obtain an optional bed expan-
sion with which to widen the two long beds,
turning them into a double bed.
12
11
9
10
11
12
To Next Page
Loading...
Need help?
General
