Need help?Do you have a question about the HobbyKing HK-7X and is the answer not in the manual?
General| Brand | HobbyKing |
|---|---|
| Model | HK-7X |
| Category | Remote Control |
| Language | English |
Brief welcome and overview of the HK-7X R/C system. Encourages reading the manual.
Disclaims responsibility for product changes, special use, or circuit implementation.
Essential safety guidelines for operating R/C models, including legal compliance and safe handling.
Guidelines for installing the receiver, avoiding metal and ensuring antenna visibility.
Instructions for connecting servos and power to the receiver, noting polarity and voltage.
Step-by-step process to link the transmitter and receiver for communication.
Explanation of factors affecting radio range and tips for maintaining signal strength.
Highlights of the HK-7X transmitter's capabilities and supported modes.
Identification and description of all buttons, switches, and indicators on the transmitter.
Detailed explanation of the function for each switch and button on the transmitter panel.
Adjusting channel direction (normal/reverse) for servos.
Setting the travel range for each channel from 0-120.
Fine-tuning servo center positions with values from -100 to 100.
Setting different control sensitivities for aileron, elevator, and rudder.
Locking the throttle signal to a specific value, independent of stick position.
Adjusting gyro sensitivity for different flight modes and lock types.
Defining throttle response curves for Normal and Idle modes.
Setting pitch curves for Normal, Idle, and Hold modes.
Adjusting the interaction between Aileron, Elevator, and Pitch controls.
Setting the AUX channel signal based on GEAR switch position.
Explanation of the AERO mode and its channel assignments.
List of channels and their controls in AERO mode.
Explanation of the V-tail mode and its control functions.
Summary of settings available for V-tail mode.
Adjusting mixture percentages for V-tail control surfaces.
Explanation of the Delta Wing mode and its channel assignments.
Summary of settings available for Delta Wing mode.
Adjusting mixture percentages for Delta Wing control surfaces.
Instructions for selecting and switching between saved models.
Alerts for throttle position and idle switch status during power-on.
Using and setting the down timer related to throttle stick movement.
Setting default channel values for receiver use if transmitter signal is lost.
Explains how end points and curves affect the final output signal.
Adjusting mixture percentages for AIL, ELE, and PIT in swashplate control.
Switching the transmitter output signal to PPM for simulator compatibility.
Procedure to change the transmission frequency to avoid interference.
To Next Page