Hobie 15 Club User Manual

www.hobiecat.com
Ref : OM_H15CLUB Issued by : SD Date : 12/2014 UPDATE : 1 Page : 22/27
E
U
R
O
P
E
22
Hobie Cat® Europe
Assembly manual - Hobie 15 CLUB
MAIN SAIL
4. Take the cunningham line (supplied with the main sail or from the rope bag) and tie it to the grommet in the sail tack
using a bowline knot or similar. Pass the line down around the cunningham cleat and back through the grommet. Pull
down on the line -do not tighten at this stage- and cleat off at cunningham cleat.
5. Take the traveller car CCT and dismount it out by removing the pin and the
split ring. Slide the bearing cylinger out by pressing the end of the plastic part.
Take the cylinder out of the upper part. Split the plastic slide in two parts and
insert each one in the track of the rear crossbar.Slide them one over the other
until they fit together
Reassemble the traveller car in a reverse manner, i.e. : fit in the upper part,
slide the cylinder and place the pin and the split ring.

Hobie 15 Club Specifications

General

Brand	Hobie
Model	15 Club
Category	Boat
Language	English