3
Hobie Mirage Drive
Drive Installation
1. Insert the Hobie Mirage Drive into the
opening of the hull near the footwells so it
is facing forward. The front of the Mirage
Drive can be determined by the location
of the fin masts. The forward edge is
illustrated to the right.
2. To lock the drive into the hull, turn the cam knobs on both
sides of the Mirage Drive until they are snug.
Pedal Adjustment
LOCKED
UNLOCKED
FORWARD
The pedals of the Hobie Mirage Drive are adjustable to
accommodate different leg lengths of kayakers. To adjust
the pedals:
1. Squeeze the adjuster han-
dles located on the pedal
cranks.
2. Keeping the adjuster handle
squeezed, move the pedal
crank to the most comfortable
position. Like a bicycle, it is
best to adjust the pedals so that
your legs do not fully extend
and knees lock. Make sure that
the metal pin on the crank fully
engages the adjustment hole.
Stainless
Steel Masts
To Next Page
Loading...
