Hochiki FireNET Plus - Front Panel Overview; Wiring Gauge Requirements; Referenced Documents; Terminal Connection Guide


FireNETPlusWiringInstruction 2 V1.01
1. Front Panel View
The figure below is the front panel view of the FireNET Plus Panel:
1
24
3
?
Figure1
2. Wiring Gauge
Use 18 to 14AWG wiring for all field terminations except for AC terminal block. Use
14AWG only for line, neutral and ground of the AC terminations.
3. Reference Documents
For additional information on installing and operating the FireNET Plus Panel, refer to
the following documents:
 FireNET Plus Installation and Operating Manual, 1700-10840, Version 1.04
 Operating Instruction, 1700-10850, Version 0.3
 Inner Door Label, 1700-04520, Version 1.04
4. Terminal Connection
The figure below illustrates the terminal connections of the FireNET Plus Panel: