33
GB
09 Functions of Deluxe system
09.01 Control panel
The bathtub with whirlpool system is ready to use when minimum water level is achived. Readyness / stand by
of whirlpool bathtub is indicated by green diode; you can fi nd the diode on the disinfection tank. (In case of additional
accesories - the control panel: it is indicated by LED diode at the bottom of the panel)
1
Press key = massage ON/OFF (highest power)
Permanent pressure = increase massage power
2
Permanent pressure = reduce massage power
3
Press key = interval ON/OFF
4
Press key = air-admix ON/OFF
5
Press key = air-bubbling ON/OFF
Permanent pressure = increase bubbling
6
Permanent pressure = reduce bubbling
7
Press key = interim fl ushing ON/OFF
Interim fl ushing is possible when the tub is empty and automatic fl ushing is off (no red lamp illuminated).
Switching off the interim fl ushing is not necessary, because it is part of a preset program and switches off
automatically.
8
Press key = light ON/OFF
9
Green LED diode
Whirltub ready to work/standby, i.e. the minimum water level has been reached
10
Red LED diode
The light is on during the rinsing process
To Next Page
Loading...
Need help?
General