Work safety
CAUTION! Please read this chapter carefully in order to minimise the possibility
of injury or accident caused by improper handling or ignorance of the Safety
Regulations. The device may only be used by a person who has read and
understood the operating instructions carefully.
General requirements for workplace safety
- Maintain order in the fan operating zone.
Do not use the device near explosive materials (flammable, gas, dust etc.).
- The device must be stored in a way that makes it inaccessible to children.
Electric safety
- The plug must be matched to the power outlet. It is forbidden to use any
cables in which the plug has been tampered with. Do not use adapter plugs
with protective ground. Unmodified plugs and appropriate sockets reduce the
risk of accidents.
Protect yourself from electrical shock. Avoid contact with grounded surfaces,
e.g. refrigerators, heat sinks, pipes. Electric shock is greater when the user's
body is grounded.
- Do not expose the device to rain or moisture. Water ingress into the device
increases the risk of electric shock.
Take good care of the power cord. Never use the cable to carry the device, pull
or unplug the plug. Protect the power cord from high temperatures, oil, sharp
edges or moving parts.
- If the unit is operating in a humid atmosphere, the mains supply must be
equipped with a residual current device at the max. sensitivity 30 mA. The
electrical connection may only be made by an authorised electrician. The
electrical connection should meet the requirements of applicable law.
To Next Page
Loading...