3
28
Caution! For the sake of children’s safety, do not leave any packaging
materials accessible and unattended (plastic bags, cardboard boxes,
Styrofoam, etc.). Risk of suffocation!
Open the packaging and carefully take out the device. Inspect the set for completeness
and any damage. Check that the plastic parts are not broken and that the power
cord is not damaged. If you nd that any components are missing or damaged,
contact the vendor and do not use the device. Keep the packaging or dispose of it in
accordance with local regulations.
7. USE
7.1 Before use
1. Take out the device from the packaging, remove all the foil wrapping from the
set items.
2. Extend the power cord. Place the device on a dry, flat, stable and heat-resistant
surface.
3. For all the device components, which come into contact with food, clean them
in accordance with section 8. Cleaning and care.
7.2 Operation modes
P – pulsing mode
0 – turning off
1 – low speed mode
2 – high speed mode
7.3 Work with blending blades
1. Place the device body on a flat and stable surface.
2. Insert the drive extension into the openings in the body.
3. Put the bowl onto the drive extension, previously installed on the body, so that
1 Blender lid
1 Jug
1 Blender blades
1 Blender base
1 User’s manual
To Next Page
Loading...
