HOFFEN FP-9063 - Using the Product Mixing Attachment; Using Grating, Cutting, Blending Attachments

3
30
installed on the drive extension.
4. Put the products into the bowl.
5. Repeat step 6 from section 7.3 Work with blending blades.
6. Place the pusher in the opening.
7. For disassembly, perform the installation steps in reverse order.
Caution! Standard mincing/shredding/blending time: 30-120 s.
Sample products:
• Flour
• Cheese (soft)
• Eggs
7.5 Work with product mixing attachment
1. Repeat steps 1-3 from section 7.3 Work with blending blades.
2. Put the product mixing attachment onto the multifunctional attachment.
3. Put the products into the bowl.
4. Repeat step 6 from section 7.3 Work with blending blades.
5. Place the pusher in the opening.
6. For disassembly, perform the installation steps in reverse order.
Caution! The product mixing attachment may be used to mix cheese and eggs,
or to quickly prepare mayonnaise or pudding.
Caution! Do not use the product mixing attachment to knead flour dough.
Sample products:
• Flour
• Eggs
7.6 Work with grating, cutting, blending attachments
1. Repeat steps 1-3 from section 7.3 Work with blending blades.
2. Insert one of the 3 available attachments (the cutting attachment, the blending
attachment, the grating attachment) into the attachment holder. Then put the
attachment holder with the attachment installed onto the drive extension in the
bowl.
3. Repeat steps 6-7 from section 7.3 Work with blending blades.
4. For disassembly, perform the installation steps in reverse order.