Hohem iSteady Multi - Page 10

10
Mode Button
Working Mode
(Model Light)
Instruction
Single Tap
PF
Pan Following
(Flashes once quickly)
Default mode, tilt & roll axis
both locked, camera is able to
move to left or right smoothly.
Double Tap
PTF
Pan & Tilt Following
(Flashes twice)
Roll axis is locked, camera is
able to move to left/right and
tilt up/down.
Triple Tap
AL
All Locked
(Flashes three times)
The camera stays in its
current orientation.
Quadratic Tap
AF
All Following & Inception
(Flashes once slowly)
Tilt axis, roll axis and pan axis
all follow.
Long Press for 6 Seconds
Calibration Mode
(Light on)
It requires to calibrate the
gimbal only when you notice
any kind of not level or drift
on any of the axes.