16
Firmware Upgrade
Please, make sure the gimbal is connected with the app via Bluetooth successfully, then enter the
“Firmware Upgrade” and follow the instruction to upgrade the latest firmware.
FAQ
Q: Why the gimbal vibrates after powering on?
A: Make sure your camera is mounted firmly and well balanced before powering on the gimbal. Do not
turn on the gimbal without a balance load, as doing so may damage the motors. For some lightweight
mobile phone, it needs to adjust the motor torsion.
Q: How to connect the gimbal via app?
A: Please be moted that the Bluetooth and gimbal must be connected firectly in the app “Hohem
Gimbal”, rather than connecting in the smartphone Bluetooth list. Make sure all the permissions are
allowed when you open the app for the first time.
To Next Page
Loading...
