Hohem iSteady XE - Folding iSteady XE; Calibrating iSteady XE

9
Folding iSteady XE
Calibrating iSteady XE
If the gimbal is not level after turning on, or the pan axis is slightly drifted when the
gimbal is still, please calibrate it. Calibrate the gimbal on a flat surface and keep it
stationary.
1. Turn on the gimbal and press the function button five times.
2. Start calibration after you hear a beeping sound.
3. Calibration is indicated with alternating flashes of the first two battery level lights
and the last two battery level lights.
4. The calibration is done after you hear two beeping sounds. The calibration takes
about 40 seconds.
Fold the gimbal as shown
in the picture.