Hohem RS01 - Page 3

③ Function Button
Single Press: Switch the landscape
and portrait modes
Double Press: Recenter the gimbal
Triple Press: Inception (Auto rotation)
④ M Button (Gimbal Working Mode)
Single Press: Pan&Tilt Follow
Double Press: Pan Follow
Triple Press: All Lock
Quartic Press: POV (All Follow)
Long Press: Switch the zoom in/out
mode and gimbal tilt control mode
(Zoom in/out mode only available in
the app)
⑥ Indicator Light
The indicator light shows green or
blue in button operation. If no light
shows, it means the remote control is
not turned on or no battery.
Green light: Gimbal controlling
Blue light: Phone camera controlling
⑤ Navigation Buttons:
Up/Down/Left/Right
Up/Down：
- Tilt Control（Indicator light shows
green)
- Control the image zoom in/out
（Indicator light shows blue and
only available in the app)
Left/Right: Pan Control
During the pairing process:
a. The pairing can be
completed in 3 seconds, after
the gimbal bluetooth light stop
flashing alternatly in yellow
and green;
b. If the remote control is not
paired within 30 seconds, the
pairing will be cancelled;
c. Click the function button to
cancel pairing;
d. Double-click the function
button to clear the paired
remote control and cancel
pairing;
(And the paired remote control
will be unavailable and need
to be re-paired)