When you connect the device, the computer will recognize the PR90 and you will hear the connecting devices sound and will see a
flashing green led on the encoder for 1 second.
15
www.encoderhohner.com +34 972 160 017 info@encoderhohner.com
1
1
32
USER MANUAL
PR90 / PR90H
Pay special attention to the TTL / HTL output configuration, since if the proper
voltage output is not selected, the devices connected to the encoder could
report read errors.
Make sure, before you connect the encoder, that the configuration required
for the encoder is the correct type for your application.
Monitoring Screen Programming Screen
To Next Page
Loading...