What does it mean if my Hokkaido Air Conditioner shows an indoor/outdoor unit communication error?
An indoor/outdoor unit communication error in your Hokkaido Air Conditioner means there's a problem with communication between the units. The Operation Lamp will flash 2 times.
What does it mean when the operation lamp flashes 6 times on my Hokkaido V-Design Air Conditioner because of Evaporator coil temperature sensor T2?
If the Operation Lamp on your Hokkaido Air Conditioner flashes 6 times, it indicates that the evaporator coil temperature sensor T2 is in open circuit or has short circuit.
What does it mean when my Hokkaido V-Design Air Conditioner shows a condenser coil temperature sensor T3 error?
If your Hokkaido Air Conditioner shows an error with the condenser coil temperature sensor T3, indicating it's in an open or short circuit, the Operation Lamp will flash 3 times and the Timer Lamp will turn ON.
What does it mean if my Hokkaido V-Design Air Conditioner displays a Compressor discharge temperature sensor TP error?
If your Hokkaido Air Conditioner displays an error related to the compressor discharge temperature sensor TP being in an open or short circuit, the Operation Lamp will flash 4 times and the Timer Lamp will turn ON.
Procedures to follow in case of gas leaks, unusual sounds, smoke, or contact with liquid.
Guidelines for safe installation, including electrical circuit requirements and qualified personnel.
Precautions during operation and maintenance, including grounding, flammable materials, and cleaning.
Highlights key features like Turbo function, High density filter, Light effects, and Louver position.
Detailed performance and electrical specifications for different models, including operating ranges and efficiency.
Information on maximum pipe length, elevation limits, and additional refrigerant requirements.
Schematic diagrams for indoor unit wiring, showing connections and components.
Explains unit display functions, including temperature, timer, and mode indicators.
Details safety mechanisms like compressor delay, shut-off functions, and refrigerant leakage detection.
Describes core operational modes like Cooling, Heating, and Auto mode with fan control.
Covers features such as 8°C Heating, Self Clean, Follow Me, and SILENCE mode.
Ensures no air or moisture is trapped in the system and performs a leak test.
Procedure for adding refrigerant if piping length exceeds the chargeless length.
Steps for collecting refrigerant into the outdoor unit prior to re-installation.
Provides detailed measurements and diagrams for the outdoor unit models.
Step-by-step instructions for removing panels, covers, and electrical parts.
Details error codes displayed on the unit and their corresponding error information.
Provides specific diagnosis and solutions for common error codes like E0, F4, E1, E2, etc.
Guides on checking components like temperature sensors and compressor resistance.
Lists resistance values for temperature sensors (T1, T2, T3, T4) at various temperatures.
Provides charts and graphs showing pressure values for cooling and heating modes.
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R32 |
| SEER | 22 |
| Noise Level (Outdoor) | 50 dB |
| Features | Sleep Mode |
To Next Page