Need help?Do you have a question about the Holip HLP-P Series and is the answer not in the manual?
General| Control Mode | V/F control, sensorless vector control |
|---|---|
| Cooling Method | Forced air cooling |
| Input Voltage | 3-phase 380V |
| Output Voltage | 0~Rated Input Voltage |
| Overload Capacity | 150% for 60s, 180% for 10s |
| Braking Unit | Built-in braking unit |
| Communication | Modbus |
| Protection Features | Overvoltage, undervoltage, overcurrent, overload, short circuit, overheating |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Humidity | Less than 95% (Non-condensing) |
| Altitude | Up to 1000 meters without derating |
Verify the inverter for damage, confirm manual presence, and check nameplate specifications upon receipt.
Explains the model number components and their meaning for HLP series inverters.
Crucial safety checks and warnings to perform before initial power-up of the inverter.
To Next Page
