Need help?Do you have a question about the Holley LoRaWAN DTZ541-ZDBL and is the answer not in the manual?
General| Brand | Holley |
|---|---|
| Model | LoRaWAN DTZ541-ZDBL |
| Category | Measuring Instruments |
| Language | English |
General safety guidelines for meter installation and handling.
Warning about life-threatening injuries from improper handling of live parts.
Conditions for warranty claims and meter repair limitations.
Statement regarding the accuracy and revision of manual content.
Lists options and defines the type designation of the DTZ541 meter.
Details the physical components and their numbering on the meter's housing.
Explains the information and labels present on the meter's nameplate.
Describes the function and operation of the meter's test LED.
Provides notes on measurement accuracy requirements and data resolution.
Instructions for attaching and connecting the meter, including dimension details.
Explains how to control tariffs using terminals and system voltage.
Details the terminal blocks for both 60A and 100A variants, including connection requirements.
Describes the segments and symbols on the meter's LC display.
Explains the display test sequence and how software versions are shown.
Details the optical data interface, its protocol, and data record variants accessible via INFO PIN.
Describes the MSB interface, its data rate, protocol, and data transmission.
Explains the LMN interface, its data rate, and compliance with industry standards.
Details how to configure the dual tariff function using registers and bit coding.
Explains the register for activating dual tariff function via LMN commands.
Explains key presses and shows display examples for operating status.
Guides on PIN entry and showing historical consumption values for tariffs A and -A.
Details displaying daily values, activating deletion, and deleting historical data.
Covers viewing weekly, monthly, and annual historical values for tariff "+ A".
Covers viewing weekly, monthly, and annual historical values for tariff "-A".
Shows INFO PIN status, PIN input state, and settings for deleting historical data.
Manages PIN input status, stopping/starting information display.
Describes the payload structure, including MRMHDR and data records.
Defines the fields and structure of the Meter Reading Message Header (MRMHDR).
Details MRM data record formats, byte lengths, content, and status bits.
Provides examples for converting HEX code to consumption values.
Explains the various fields and values derived from the meter's payload data.
Describes the structure and fields of the Meter Control Message Header (MCMHDR).
Defines MCMHDR bits, execution, send readings, and send now functions.
Specifies the interval for sending unconfirmed meter readings.
Defines the default confirmed interval for meter readings.
Explains maximum repetitions for confirmed messages without acknowledgment.
Provides examples for changing data record intervals.
To Next Page