Need help?Do you have a question about the Hologram CHROMA CONSOLE and is the answer not in the manual?
General| Current Draw | 300mA |
|---|---|
| Effects | Delay, Reverb, Pitch Shift |
| Controls | Footswitches |
| Delay Time | Up to 2 seconds |
| USB | Yes, for MIDI and firmware updates |
| Power Source | 9V DC |
Describes the four main effect modules: Character, Movement, Diffusion, and Texture, each with five unique effects.
Explains the MIX knob's function for blending input and effected signals for optimal sound.
Details the function of the A, B, C, D buttons for changing effects and bypassing modules.
Outlines the functions of the TAP and BYPASS foot switches for tempo, capture, and preset navigation.
Guides on automatic calibration to match input signal level for optimal effect performance.
Explains manual selection of input headroom levels (Low, Medium, High, Very High).
How to cycle through effects using module buttons and bypass them by holding a button.
Defines primary controls (bold) and secondary controls (gray) accessed via menus.
Details single press, long press, and double tap actions for TAP and BYPASS switches.
Details the DRIVE, SWEETEN, FUZZ, HOWL, and SWELL effects and their parameters.
Explains how TILT adjusts tone and SENSITIVITY fine-tunes headroom and response.
Details the DOUBLER, VIBRATO, PHASER, TREMOLO, and PITCH effects and their parameters.
Details CASCADE, REELS, SPACE, COLLAGE, and REVERSE effects and their parameters.
Details FILTER, SQUASH, CASSETTE, BROKEN, and INTERFERENCE effects and their parameters.
How to enter the secondary controls menu by pressing A and B buttons simultaneously.
Methods to exit the secondary menu or reset all secondary controls to defaults.
Details the DRIFT parameter's role in MOVEMENT and DIFFUSION modules for instability.
Fine-tuning headroom with Sensitivity and adjusting module output volume with Effect Vol.
Adjusting the overall output volume of the Chroma Console's FX output.
How to enter gesture mode and start recording knob movements.
Details on recording, overwriting, and automating knob movements with gestures.
Instructions for individually or globally deleting recorded knob movements.
Explains the sustainer and looper functionality with up to 30 seconds of record time.
How to access the FX Setup menu to customize presets.
How to reorder the effect modules within a preset's signal chain.
Configuring the BYPASS switch to bypass individual modules or the entire pedal.
Assigning an expression pedal to control primary parameters like TILT, RATE, TIME, MIX, or AMOUNT.
How to choose between TILT, LOW-PASS, or HIGH-PASS filter styles.
Instructions to exit the FX Setup menu or reset all FX Setup parameters.
How to enter the menu for copying and saving user presets.
Methods for navigating through user presets and banks using knobs or foot switches.
Procedure for saving the current preset or overwriting an existing one.
How to enter the preset browser to load and audition presets.
How to navigate presets using module knobs or foot switches.
Table outlining settings adjustable via knobs: MIDI Channel, Routing, Clock Source, etc.
Setting the MIDI channel for receiving messages from external devices.
Choosing how Chroma Console routes MIDI messages and internal clock signals.
Detailed explanation of Interface, Thru, and without internal clock MIDI routing modes.
Setting the source for MIDI clock synchronization (AUTO, USB, DIN, Internal).
Adjusting the brightness of the pedal's indicator LEDs for different lighting conditions.
Enabling or disabling automatic auditioning of presets when navigating.
Selecting between Buffered Bypass, Buffered Bypass with trails, or True Bypass.
How to reset all global settings back to their original factory defaults.
Steps to perform a full factory reset, clearing presets and global parameters.
Details all physical connections including audio, EXP, MIDI, and USB ports.
How Chroma Console automatically routes mono and stereo signals.
Specifications and assignment options for connecting an expression pedal.
Information on MIDI IN/OUT DIN ports and USB-C MIDI connection.
Lists MIDI messages (CC#) and ranges for primary controls like TILT, RATE, MIX.
Lists MIDI messages (CC#) and ranges for secondary controls like SENSITIVITY, DRIFT.
MIDI messages (CC#) and ranges for STANDARD and DUAL BYPASS controls.
MIDI mapping for GESTURE, CAPTURE, TAP TEMPO, and FILTER MODE.
Mapping of USER PRESETS to PROGRAM CHANGE (PC#) messages for banks and slots.
Details the 2-year warranty period and what is not covered (abuse, wear and tear).
To Next Page
