e-ICE User’s Guide
13
HIRC Trim Operating Procedures:
Connect the e-ICE to a PC, execute IDE3000.exe and start a new operation with Trim
HIRC.
The Configuration Options include setting the operating voltage and the HIRC as the
system frequency using the following steps:
Set the operating voltage SysVolt according to actual requirements.
Configure the SysFreq to have the system frequency provided by the internal DEV
or by an external oscillator supplied by the user
Set V
DD
(for Internal RC selections) according to actual requirements
Set the Internal RC according to actual requirements
Configure OSC to have a system frequency to be provided by the internal DEV HIRC
To Next Page
Loading...
