e-ICE User’s Guide
9
e-ICE Operating Notes
HT-IDE3000 Version
Make sure the IDE3000 in use is the latest version before using the e-ICE.
Check the e-ICE version from “Help\About HT-IDE3000…” in the IDE3000 function list.
If the version is V7.4 or above, when the IDE3000 is activated, the IDE will auto-detect
the version info and suggest if it is necessary to upgrade, or click “Help\Check Live
Update…” for a manual upgrade.
Figure 12 About HT-IDE3000
Figure 13 Help
System Frequency
For simulation convenience, check the red box as shown in the figure below to select
an MEV board supplied DEV operating frequency source. During e-ICE simulation an
externally connected HXT, ERC or LXT oscillator is not permitted. However, the
required oscillator should be connected for actual IC applications.
Figure 14 SysFreq Frequency Setup Window
To Next Page
Loading...
