HOLYKELL UF2000 Series - Check Components; Component Verification and Matching

2
Flow Transducer Picture Model Measuring range Temperature
Clamp on
TS-2 (small) DN32-65
-30 ~ 90℃
TM-1 (medium) DN80-400
TL-1 (large) DN450-1000
High temp.
Clamp on
TS-2-HT (small) DN32-65
-30 ~ 160℃
TM-1-HT (medium) DN80-400
TL-1-HT (large) DN450-1000
Insertion
TC-1 (standard)
DN80-6000
-30 ~ 160℃
TC-2 (extended)
TP-1 (parallel) DN200-6000
Inline
Standard DN15-1000 -30 ~160℃
Temperature
Transducer
Picture Model Measuring
range
Temperature Cutoff water
Clamp on
CT-1 ≥ DN50 -40 ~ 160℃ No need
Insertion TCT-1 ≥ DN50 -40 ~ 160℃ Need
Insertion
under pressure PCT-1 ≥ DN50 -40 ~ 160℃ No need
Insertion
small sizes SCT-1 < DN50 -40 ~ 160℃ Need
2. Check Components
1. Please check you have all the components in the order.
2. All codes on the converter and transducers should be matched. They are used in sets.
Transducer Codes
Transducer Codes on Converter